The OE14-504 Underwater HDTV Camera is designed and priced to be used for all general purpose ROV inspection tasks. Video output is available as Component (Y, Pb, Pr) and HD-SDI on coax or fibre connectors (Single or Multi-mode). CWDM alternative wavelengths are also available. It is possible to easily switch to high resolution composite video output if HD is not required for certain tasks.
The OE14-504 is a multi-standard camera with the ability to change video formats by IR remote control (RC) or by GUI.
Long line drive can be set by RC or GUI and allows the component signal to drive three matched coax cables with no degradation over three hundred metres. In addition to full control of the camera using the GUI, white balance can be set to 3,200K, 5,600K or to auto tracking and back light compensation can be switched on or off using the remote control.
A domed water compensated port and optical zoom provide a close-up inspection capability combined with the flexibility of a 10x magnification for powerful stand off inspections.
The unique IR remote control also allows camera control set-up. Camera control can be single wire (tri-state), two wire (bi-polar), USB, RS485 and RS232.
The inclusive Kongsberg Maritime Graphical User Interface (GUI) provides control functionality via the serial link.