Home > Products > Products by product area > Bridge systems > Navigation systems >

GNSS compass and position sensor

SeaNav 300

SeaNav 300 GPS compass

Contact us

The SeaNav 300 navigation sensor is tested and approved in accordance with international regulations as a THD (Transmitting Heading Device), and has Wheelmark certification. The SeaNav 300 provides position and true heading output with no moving parts. The instrument has the potential of replacing several vessel instruments with one compact navigation package (gyrocompass, GNSS receiver equipment, speed log and rate of turn) which outputs heading, position, velocity and rate of turn.

  • True heading anywhere on earth
  • 0.5º heading accuracy
  • Heading accuracy unaffected by the latitude
  • Heading available in periods of GNSS drop-outs
  • Compliant to WAAS, EGNOS and MSAS Satellite Based Augmentation Systems
  • Replaces several instruments with one robust, integrated product
  • Only paired cable (no coax) between the mast unit and the equipment on the bridge
  • 20 Hz update rate on heading, rate of turn and position measurements (configurable)
  • Output of data on Ethernet
  • 1PPS out synchronization signal

The SeaNav is designed for integration with other navigation equipment and will as default be configured and operated from an ECDIS without the need for a separate external display. The Sensor Unit contains two GNSS receivers and an inertial rate sensor. All operation and functionality are handled from the ECDIS in an integrated bridge system.

Precision heading is derived from the fixed-distance dual GNSS antenna arrangement in the antenna module, using carrier phase data to generate heading information independent of latitude and vessel dynamics. GNSS (GPS and GLONASS) position and velocity are calculated from both of the two antennas, which gives total redundant position and velocity sources in this product.

Input of DGNSS corrections or reception of SBAS (WAAS/EGNOS) signals may improve position accuracy. The inertial element provides yaw information. In case of short GNSS signal loss, the inertial sensor automatically takes over as the prime source for heading determination until the GNSS comes back on line. The rate element and GNSS are working together seamlessly, ensuring accurate, continuous and robust heading and position information.

Related publications (PDF)

Installation / maintenance

All electronics is placed within the antenna module and the unit is by default delivered with a bracket for easy mounting. The unit needs power and a signal cable. It requires no scheduled maintenance or recalibration.

The unit is easily configured using the built-in WEB user interface (UI). Software updates are supported via the WEB UI but also the locally available USB interface will automatically detect new software when a USB storage device is inserted. The update will be accomplished without interfering with the existing configuration. The latest software will continuously be available for download from an FTP server hosted by KONGSBERG.

Contact us