K-Pos dynamic positionin system operator console
Additional K-Pos dynamic positioning system operator stations can be connected to the data network. Each operator
station functions independently. Command of the vessel is easily transferred between
the different operator stations.
cJoy DP-OT operator terminal
Operator terminals (cJoy DP-OT) can be connected to the data network. Each terminal
operates independently. Command of the vessel can easily be transferred between
the operator stations and operator terminals.
cWing remote joystick terminal
Wing terminals (cWing) can be connected to one of the operator stations/terminals.
Command of the vessel can easily be transferred between the operator stations, operator
terminals and wing terminals.
The K-Pos DPC-1 controllers can be upgraded to DPC-2 (dual redundancy) by adding:
- A controller computer (RCU)
- I/O Bus (RHUB)
- Preconfigured mounting plate (with fuse, power, filter, patch box for LAN, cable ducts etc.)
It would also need software update and, if needed, adding units to the IO system
to get proper segregation. The K-Pos DPC-2 controllers can be upgraded to DPC-3
(triple redundancy) by simply adding a third control computer (RCU).
Screen capture printer
A screen capture printer can be connected to the data network. This gives the
operator the possibility to print the current display picture.
Data logging system
Extensive data logging functions are available for the K-Pos systems as a separate
History Station with recording and reviewing facilities.
IMO Equipment Class 2 upgrading
The K-Pos DP-11 and DP-12 systems can be upgraded to IMO Equipment Class 2 (redundant
system) by adding one or more operator stations, upgrading the DP controller to
DPC-2 (or DPC-3) and add necessary reference systems and sensors.
IMO Equipment Class 3 upgrading
The K-Pos DP-21/22 and DP-31/32 systems can be upgraded to the requirements of
IMO Equipment Class 3 by installing an DP-11/12 system in a separate compartment
and connecting it to the data network as a backup system. At least one of each sensor
type and one position-reference system must be connected to the backup system.